Monitoring ILOMs with Enterprise Manager

I recently had the chance to talk to a few Hardware managers at a client site, and mentioned in passing that one of the neat tricks you can do with Enterprise Manager 13c, was monitor the physical hardware. A week later, they were calling me back asking how to make that happen, so I took the opportunity to document this process while working on a Netra Module System ( more BLOGs on that system in the near future)  this week.

With EM13c, you truly have a single pane of glass, down to the hardware! You can Monitor your systems, check serial numbers, count physical cores and even drill down to the internal sensors in the chassis, like input temperature, fan speeds and even the electrical consumption and metrics!

With EM13c, ILOMs are added as you would any target, using the  guided manual process. To do this follow the following steps.

 

First, log into  your EM system, and in the upper right corner select setup->Add target –> Add target Manually

image

 

You should now see the Overview page. Since we will be using the Guided Process click there. As a note, this has changed a little when compared to EM12c, but the overall process is similar.

image

 

Next, scroll down till you see the Systems Infrastructure Server ILOM Guided Discovery Process. Note, there all all sorts of hardware monitoring processes in EM13c now, so don’t select the wrong one!

image

 

We will no fill in the details, like the target name, IP/DNS info, and the login credentials used to access the ILOM. Being that this was not done in my lab, I have blacked out some of the EMD details, but normally you will use the defaults there.

image

Before you continue, click the “Test Connection” button. This will verify that EM can talk to the ILOM.

image

image

After a few seconds, you should have a pass on the test. If you don’t pass, please verify that the EM server can SSH to the ILOM using the credentials and IPAddress/DNS name you provided.

Next, click on the “Add” button to add the ILOM.

image

 

 

image

This will run for a few seconds, and you should have the ILOM successfully added now.

image

 

Now what do you do next? How about take a look at the new target!

Let’s go find it in the list of EM targets! Click the Target Icon –> All Targets

image

Next scroll down till you the the ILOM under the Operating System

image

 

You will now see a list of all the ILOMs, in this case it is just the one. Click on the ILOM now.

image

 

This will take you to the Server’s physical page. If you have not noticed, I did switch to my home lab for this part. I don’t mind folks knowing my server names and since I have been doing this for a while I have some historical data to show. Smile

On the lanfing page for the ILOM target, you will see the Photo-Realistic view of the system.

image

On the right side, you have several views for Hardware, Logical, Power, Network and Service Processor aka ILOM .

image

Let’s look at the Power view, and click that icon.

image

 

Your now at the power view, showing Fan, Temperature and power status for the last few hours.

image

As with almost ANY EM Target, there is more than the summary views. You can also drill down into the metrics to get more information. In this case, we will drill down into the metrics to see the last 7 days of inlet temperature.

First, click on the Systems Infrastructure Server –> Monitoring –> All Metrics

image

 

Now , in the left side scroll down until you see the “Inlet/Outlet Temperature” metric, and expand it to expose the “Inlet Temperature in Celsius”. You can then slect the “View Data” dropdown to show the last 7 days

 

image

 

From the graph you can see my lab bounced with a few degrees, relatively stable. Now pay around with your metrics, and explore the new target type. If you managing the servers, don’t; forget that you  can set thresholds to enable alarming of the target!

One thought on “Monitoring ILOMs with Enterprise Manager

  1. thanks for the info , its really cool to manage the ilos from enterprise maanger , nice article

    thanks

Leave a Reply

Your email address will not be published. Required fields are marked *

*